6 EDISON SENIOR RAIL ASSEMBLY INSTRUCTIONS
Connecting Rail Segments
After installing the mid-leg caps, slide the rails onto
the mid-leg assembly. The openings in the mid-leg
caps at the end of each rail segment should
fit snugly around the mid-leg leg assembly
brackets. The example below shows two end
rail segments connected.
Screw Mid-Leg Onto Rails
Secure the mid-leg to the rails using 5 (0001140)
screws on each side, as shown below. Two screws are
driven from below, two from the sides, and one from
the inside of the rail segment for a total of 10
screws. The bottom plate of the leg sits internal
to the bottom plate of the rail.
M6-1.0x12mm Low
Profile Cap Screw
(0001140)
*Please note: a drill
extension or 90 degree
bit is helpful for this step.
3.
4.