Watson-Marlow qdos 20, Инструкция по эксплуатации

Страница: 153 / 235

15.2.8 PROFIBUS GSD file
Qdos PROFIBUS pump can be integrated into PROFIBUS DP V0 network using a General Station Data (GSD) file.
File identifies pump and contains key data including:
l
Communication settings.
l
Commands it can receive.
l
Diagnostic information it can pass to PROFIBUS master on interrogation.
The GSD file—WAMA0E7D.GSD—can be either be:
l
Downloaded from Watson-Marlow website and installed.
l
Typed into PROFIBUS master directly using a GSD editor program.
NOTE52
Dataflow to/from pump may need to be byte-reversed, due to differences of handling data
between suppliers of master devices.
1 The GSD file, filename: WAMA0E7D.GSD
2 ;
3 ;************************************************************************************
4 ;* ================================================================================ *
5 ;* *
6 ;* Watson-Marlow Bredel Pumps *
7 ;* Bickland Water Road *
8 ;* Falmouth *
9 ;* Cornwall *
10 ;* TR11 4RU *
11 ;* Tel.: +44(1326)370370 *
12 ;* FAX.: +44(1326)376009 *
13 ;* *
14 ;* ================================================================================ *
15 ;* Filename: WAMA0E7D.GSD *
16 ;* GSD file version 3 from 2013-09-24 *
17 ;* -------------------------------------------------------------------------------- *
18 ;* *
19 ;************************************************************************************
20 #Profibus_DP
21 GSD_Revision = 3
22 Vendor_Name = “Watson Marlow”
23 Model_Name = “Qdos Profibus Pump”
24 Revision = “Version 3.00”
25 Ident_Number = 0x0E7D
26 Protocol_Ident = 0
27 Station_Type = 0
28 FMS_supp = 0
29 Hardware_Release = “V1.00”
30 Software_Release = “V1.00”
31 Redundancy = 0
32 Repeater_Ctrl_Sig = 0
33 24V_Pins = 0
34 9.6_supp = 1
35 19.2_supp = 1
36 45.45_supp = 1
15 INSTALLATION: PART 6 (SETTING UP THE PUMP (CONTROL SETTINGS)) 153