Watson Marlow Pumps 521CC, Руководство пользователя

Страница: 16 / 47

10.8 Varmeca inverter factory settings
The Watson-Marlow 521VI/RC and 521VI/R2C inverter default settings are listed in the
table below. For more information on each parameter and its options, consult the Leroy-
Somer Varmeca-30 operating instructions.
10.9 Varmeca care and maintenance

Temperature variations and excessive humidity encourage the formation of condensation.
If this occurs, the condensation drain plugs at the bottom of the motor should be
removed, even in a very humid atmosphere.

No specific servicing is required for Varmeca-30 motors, apart from regularly removing
dust from the fan grille and the cooling fins at the bottom of the unit.

Dismantling the Varmeca-30 while it is under warranty will invalidate the warranty.
Parameter Set
value
Possible
settings
P01 F MIN 8 8Hz
P02 REF 0V -
4mA 8 8Hz
P03 F MAX 80 80Hz
P04 REF 10V -
20mA 80 80Hz
P05 ACCEL 3 3s
P06 DECEL 3 3s
P07 STOP
MODE RAMP RAMP
P08 Un MOT 400V 400V
P09 FN MOT 50Hz 50Hz
P10 U / F C C: 0.25-1.1kW;
D: 1.5-7.5kW
P11 BOOST 8% Adapted to
motor according
to power
P12
OVERBOOST 20% Adapted to
motor according
to power
P13 F PWM 11 11: 0.25-2.2kW;
8: 3-4kW
P14 CONFIG Standard Standard
Parameter Set
value
Possible
settings
P15 VP1-1 50Hz
P16 VP2-1
VP1-2 60Hz
P17 VP2 40Hz
P18 VP3-2 70Hz
P19
ROTATION FORWARD FORWARD
P20 SELECT
3 OUTPUT N
P21 PI K PRO 10
P22 PI K INT 10
P23 F MOT -
P24 I MOT -
P25 FAULT 0
P26 STOP F
min 0
P27 LOG
CDC-VMA -
P28 CAL MOT 21M
025:520
Adapted
according to
motor power
Page 16 of 47 Watson-Marlow Bredel E-Manuals
14/12/2009 file://M:\staging\pdfs-global\m-521-cc-gb-03.htm