PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
PAGE 3 OF 3 | UPDATED ON 5.05.2020
STYLE No. RHWS01
Rhea Marble Two Leg Single Washstand
with Top and Sink 42” x 24” x 35”
10. Make final FAUCET and DRAIN connections
(if applicable). Turn on the water and operate
the drain and faucet fittings to ensure proper
operation. Check all connections for leaks.
9. If desired, a bead of caulk or a clear silicone may be
applied where the TOP SLAB contacts the finished
wall.
NOTE:
The use of certain plumber’s putty may
stain stone or tile surfaces.
8. Add a bead of caulk or clear silicone on the top
surface of the BASE. Place the TOP SLAB over the
BASE with the SINK positioned inside the FRAME
and bump against the wall. From underneath the
slab, fasten the TOP SLAB to the FRAME with the
SCREWS and WASHERS provided.
7. Install the FAUCET and the DRAIN on the TOP
SLAB with SINK.
INSTALLATION GUIDELINES
11. Place one SILICONE BUMPER on top of each BAR
side 1” away from the LEG’s inner surface, Install
the GLASS on top of the BARS to finish the setup.
