PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
PAGE 1 OF 3 | UPDATED ON 5.05.2020
STYLE No. RHWS01
Rhea Marble Two Leg Single Washstand
with Top and Sink 42” x 24” x 35”
INSTALLATION GUIDELINES
TECHNICAL DETAILS
DETAIL
SPECIFICATION
WEIGHT
600 lbs [272 kg]
ROUGH-IN SUPPLY HEIGHT RECOMENDED
21” [533 mm]
ROUGH-IN WASTE HEIGHT RECOMENDED
19” [483 mm]
ROUGH-IN
An optional 2” x 6” blocking can be used to secure the WASHSTAND to the wall.
WARNING
This product is extremely heavy. It is
STRONGLY
recommended that
2 or more persons install this product.
IMPORTANT
To ensure this product is installed properly, you must read and follow
these guidelines.
The owner/user of this product must keep this information for
reference.
This product must be installed by a professional licensed contractor.
Be sure your installation conforms to federal, state, and local codes.
In the State of Massachusetts, all installations must comply with the
rules and regulations set forth within 248 CMR.
Inspect this product to ensure you have all the parts required for
proper installation. Product is sold partially assembled but shown
fully disassembled for illustrative and service purposes only.
The use of certain plumber’s putty may stain stone or tile surfaces.
Take all necessary precautions to ensure that this washstand is
protected during installation.
Ensure that the floor is level and that there is proper floor support to
accommodate this heavy washstand.
Proper blocking is suggested to attach the washstand to the wall.
If further assistance is required, please contact Product Support at
1-800-927-2120 Monday through Friday, 8am – 6pm EST.
