Waterworks
IOM
Sensors
| 6 |
1 INTRODUCTION
IMPORTANT WARNING! It is very important that all personnel working with the equipment have read and
understood the instructions and indications provided in this manual, and that they follow them prior to using
the equipment itself. The manufacturer assumes no responsibility for the consequences resulting from improper
use by the worker.
The suitability of the device for particular purposes shall be the worker’s responsibility.
The warranty will be considered void in cases of improper installation and use of devices (systems).
The manufacturer shall bear no responsibility for any damage caused by improper use, improper installation,
or tampering of own products. Installation, connection, commissioning, and maintenance must be carried out
by personnel who are qualified and authorized for this purpose. The personnel in charge of the installation
must make sure that the measurement system is properly connected as per the wiring diagram indicated in
this document.
The manufacturer shall bear no responsibility for any damages or injuries resulting from any misunderstanding
of this manual. In order to avoid possible accidents to persons or things caused by incorrect interpretation of
the instructions, the user must not proceed with operations and/or interventions on the converter if there are
uncertainties or doubts regarding the operation(s) to be performed. We recommend contacting Assistance
Service for clarifications in this regard for more precise instructions
The manufacturer will be held responsible only if the converter will be used in its original configuration.
For applications that require high working pressures or use of substances that may be dangerous for people, the
environment, equipment, or anything else: In case of pipe breakage, EUROMAG INTERNATIONAL recommends
taking necessary precautions, such as adequate positioning and protection or installation of a guard or safety
valve, before installing the CONVERTER in the COMPACT version.
The device contains live electrical components; therefore, installation, checks, and maintenance must be carried
out by experienced and qualified personnel who are aware of all necessary precautions to be taken. Before
opening any internal part, please disconnect the power supply.
1.1
MANUFACTURER’S STATEMENT
Stresses and loads possibly caused by earthquakes, strong winds, fire damage, vibrations, and natural disasters
were not taken into account in the phase of machine designing.
Do not install the machine in such a way that it acts as a focus for pressure on the pipes. External loads were
not taken into account in the device configuration.
While the device is working, the pressure, supply voltage, and/or temperature values indicated on the label
or in this Operating Manual must not be exceeded.
1.2 PACKAGING VERIFICATION
At the moment of purchase and/or upon receipt of the product, the buyer is strongly advised to check the quality
of the packaging, which must be intact, without visible dents, and completely and correctly closed.
When opening the packaging, also check that the product complies witwh the information on the packing list in
terms of completeness of components/accessories.
NOTE: All EUROMAG INTERNATIONAL software is available on the USB stick that accompanies the product.
The software can also be downloaded from the website www.euromag.com by accessing the Download Area.
A free registration will be required, after which you can download the configuration software for your product.
