PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
PAGE 4 OF 4 | UPDATED ON 11.05.2020
STYLE No. 100518
Lucerne Metal Two Leg Single Washstand
36 15/16” X 22 7/8” X 29 3/8”
OPEN END
WRENCH
INSTALLATION GUIDELINES
6. It is recommended to install the FAUCET, and SINK (sold
separately) to the SLAB TOP before setting it into the
FRAME. The GLASS SHELF should be installed after
plumbing is complete.
NOTE:
Plumbing Installation must be done by a qualified
plumber and in accordance with all applicable plumbing
and building codes in force in your area.
5. Secure the WASHSTAND SINK FRAME and GLASS
SHELF FRAME to the wall with the FINISHED
ROUND
HEAD PHILLIPS SCREWS
provided.
NOTE:
For safe mounting, it is important to use the proper
hardware for your wall type. The included hardware is for
stud mounting only. If the METAL BRACKET cannot be
secured to a wall stud because of inappropriate spacing
and/or because you have a different wall type (e.g.,
plaster, concrete, brick, etc..) please consult your local
hardware store for fastener advice.
4. Slightly loosen the metal BRACKETS attached to the
back of the WASHSTAND SINK FRAME. At your desired
location, bring the WASHSTAND against the wall and
secure the WASHSTAND BRACKETS using the FINISHED
PHILLIPS SCREWS provided. After fastening the
BRACKETS on the wall, re-tighten the metal BRACKETS
with the OPEN END WRENCH or RING SPANNER
provided.
WASHSTAND SINK
FRAME
WASHSTAND SINK
FRAME
GLASS SHELF
FRAME
GLASS SHELF
FAUCET
(SOLD SEPARATELY)
SINK
(SOLD SEPARATELY)
SLAB TOP
(SOLD
SEPARATELY)
BRACKET
FINISHED PHILLIPS
SCREW 40mm X4
FINISHED
PHILLIPS
SCREW ROUND
HEAD 60mm
X6
