PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
PAGE 3 OF 4 | UPDATED ON 11.05.2020
STYLE No. 100518
Lucerne Metal Two Leg Single Washstand
36 15/16” X 22 7/8” X 29 3/8”
INSTALLATION GUIDELINES
3. From your prepared location, pre-set the assembled
WASHSTAND against the wall, examine the alignment of
the WASHSTAND to see if leveling is necessary. If needed,
slightly tilt the WASHSTAND and turn the LEVELERS
clockwise to raise the FIXTURE and counter-clockwise
to lower it. Adjust all LEVELERS until the correct level is
achieved.
2. Set the WASHSTAND SINK FRAME on top of the LEGS
and secure this with the SOCKET FLAT HEAD SCREW.
Tighten all the SCREWS to a snug fit.
NOTE:
The SINK FRAME has 2 CORNER BRACKETS with
holes for the SCREWS to pass through which correspond
to the threaded holes on the top of each LEG.
1. In preparation for assembly, place the WASHSTAND
LEGS on a non-abrasive working bench with the
LOCATOR of the LEG facing upward. Fit both ends of the
GLASS SHELF FRAME into the LOCATOR of each LEG
and secure the FRAME using the SOCKET FLAT HEAD
SCREW provided.
NOTE:
Both ends of the SHELF FRAME have holes for
the SCREWS to pass through which correspond to the
threaded holes on the LOCATOR on each LEG.
WASHSTAND LEG
LOCATOR
GLASS
SHELF
FRAME
SOCKET FLAT HEAD
SCREW X 2 / LEG
SOCKET FLAT HEAD
SCREW X3 / LEG
CORNER BRACKET
WASHSTAND SINK
FRAME
LEVELER
LOWER RAISE
