TP500 OPERATION
PRIMING MODE:
When power is ON, the system will enter Priming Mode. In this mode, all devices such as JETS, BLOWERS or LIGHT are
operable. JETS can be turned on and off to prime the pump. The system will exit priming mode and go to the MAIN
display when the Circle icon is tapped, or after 4 minutes of inactivity.
SPA OPERATION:
Turn system accessories ON and OFF by the tapping appropriate icon on the left side of panel (LIGHT, JET 1 SPEED,
BLOWER, JET 2…) These accessories have timeout defaults from the manufacturer and will turn OFF automatically after
the time has expired. Default timeout for LIGHT is 60 minutes; BLOWER is 15 minutes; JET at low speed is 60 minutes;
and JET at high speed is 15 minutes. Users can change these times in “DEVICE TIMEOUT” setting menu.
SETTING TEMPERATURE:
To change the water set temperature, tap the smaller temperature number and scroll to the desired temperature. Tap
SELECT icon to choose temperature or EXIT to return to Main Screen. Changing the set temperature will make the
Heater Pump turn on to get an accurate water temperature and to determine if the water needs to be heated up.
HEATER:
When the Heater Pump turns on the HEATER START-UP icon will appear if heat is needed. The heater will turn on and
HEATER icon will appear after 5 minutes.
PANEL TIMEOUT:
If a user is in the Setting Menus and no icon is tapped within 60 seconds, the screen will timeout, current screen setting
will be lost and the panel reverts back to the Main Screen. In Main Screen, if no icon is tapped within 60 seconds, all
LED and LCD lights will turn off and the panel will go to sleep. Tap the screen to wake the panel, LED and LCD lights will
turn back on and the panel will poll for water temperature.
MENU NAVIGATION:
• To enter settings, swipe from right to left from Main Screen.
• To return to Main Screen from settings, swipe from left to right.
Software Version 71.06.1
3
