FILTER CARTRIDGE
REPLACEMENT
STEP
12
Press down on the filter cartridge so that the double O-ring
seal moves into place within the bottom, center opening.
STEP
15
Pull up on the Top Cap to seat o-rings.
STEP
18
Relieve the system of air in the tank as the system fills with
water, by pushing down on the red depressurization button
on the top cap of the system. Keep the button pushed down
until all the air pressure is completely released, and water
comes out of the red depressurization button.
STEP
21
Check for leaks.
STEP
13
Reposition the Top Cap into its original location.
STEP
16
(If completed Step 2, then…) Close the
John Guest
®
fitting and shut-off.
STEP
19
Release the red depressurization button.
STEP
22
Run water through system for
10 minutes
before use.
STEP
14
Reattach the top tank Snap Ring.
STEP
17
Turn the water supply on, opening the inlet
and outlet valves on the bypass.
STEP
20
Replace the Umbrella cap to the top of the system.
10
NO TOOLS
REQUIRED
3
2
