1
2
3
4
Turn off water supply.
Observe all local
plumbing codes.
Inspect plumbing for signs of
damage. Replace as necessary.
DO NOT
use petroleum based
products on this faucet.
REQUIRED TOOLS:
Phillips Screwdriver
Adjustable Wrench
Channel Locks
BEFORE YOU BEGIN YOUR INSTALLATION:
BEFORE YOU BEGIN YOUR INSTALLATION:
F
COUNTER
OR SINK
1.
2.
3.
4.
A
B
C
D
E
A
C
B
PULLDOWN FAUCET INSTALLATION
PULLDOWN FAUCET INSTALLATION
Remove the clamp nut (A) and
washer (B) from the threaded
shroud (C).
Slide washer and thread the
clamp nut onto threaded shroud.
Tighten nut snug to underside of
sink or counter.
Turn faucet to the desired handle
position. Securely tighten clamp
screws (F).
Fit flexible hoses (D) and spray
connection tube (E) through hole
on counter or sink.
(No plumbers
putty is required. O-ring seals base)
.
Waterstone faucets are designed to be installed in 3 different faucet
positions. Choose to have the handle on left, front or right. Your faucet is
factory configured for the most common positions - a front and right side
installation. To reverse this and have the handle positioned on the left,
connect the hose for cold water to the hot supply and the hose for hot water
to the cold supply. This will maintain the relationship of pulling the handle
for hot water or pushing for cold water.
HANDLE ON LEFT
HANDLE IN FRONT
HANDLE ON RIGHT
ORIGINAL FACTORY POSITION
MAY HIT BACKSPLASH
NEW ADJUSTED POSITION
CLEARS BACKSPLASH
H
C
A
B
C D
A
B
E
E
G
C D
F
F
HANDLE POSITION
HANDLE POSITION
