Watersnake
12
FOOT PEDAL CONTROL SYSTEM
The low profi le foot pedal control is used to adjust direction and speed. A
variable speed dial control is located at the right side of the foot control unit.
Directional buttons control steering.
Functions:
1.
Left directional button
To steer left, press the button marked “L” at the top left hand corner of
the foot control. Release the button when the desired degree of turn has
been achieved
2.
Right directional button
To steer right, press the button marked “R” at the top right hand corner of
the foot control. Release the button when the desired degree of turn has
been achieved
3.
Momentary button (propulsion whilst button is held down, propulsion
stops when button released)
To activate the momentary function, the constant on / off switch (4) must
be moved to the back position. NOTE – momentary function is not
operational when the constant on / off switch (4) is in the forward position
4.
Constant On / Off switch (constant propulsion on / off)
When set in the forward position (on) the propeller will run constantly.
The speed of propulsion can then be controlled by the variable speed
control dial (5)
5.
Variable speed control dial
Controls the speed of the propeller. The propeller can be slowed to a
complete stop by turning the dial back fully
1
2
3
4
5
Содержание Combat 54/48
