Waters Network Systems
User’s Manual
Page 49
PSX/MS1008 Models with Gigabit Uplink
The following table describes the Spanning Tree parameters.
Parameter
Description
Priority
You can change the priority value which is a value used to
identify the root bridge. The bridge with the lowest value has
the highest priority and is selected as the root. Enter a
number 1 through 65535.
Max Age
You can change Max Age value, which is the number of
seconds a bridge waits without receiving Spanning-Tree
Protocol configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.
Hello Time
You can change Hello time value which is the number of
seconds between the transmissions of Spanning-Tree
Protocol configuration messages. Enter a number 1
through 10.
Forward Delay
time
You can change forward delay time, which is the number of
seconds a port waits before changing from its Spanning-Tree
Protocol learning and listening states to the forwarding state.
Enter a number 4 through 30.
The following parameters can be configured on each port. Click the
Apply
button
to modify.
