background image

12

www.watersfitness.com

5)  Dismounting the Cycle

This product has a weighted flywheel with a fixed gear, meaning 
the pedals will continue to turn as long as the flywheel is still 
moving. To stop the flywheel, push down on the resistance knob. 
Once the pedals have stopped moving, it is safe to dismount 
the cycle.

Important:

 Do not attempt to remove your feet from the pedals 

while they are in motion.

Preventative Maintenance

Daily 

– Wipe down the cycle at the end of each usage. This will 

keep  the  unit  clean  and  prevent  rust/corrosion.  It  is  best  to 
use a liquid non-abrasive cleaner. It is also best to remove the 
resistance tension from the flywheel after each usage by turning 
the resistance knob counter-clockwise. 

Weekly

 – Inspect and tighten all bolts, assemblies and parts. 

Monthly

  –  Inspect  frame  for  rust/corrosion  and  wear  items 

for  adjustment.  Frame  should  receive  a  complete  inspection 
including a tilt-up to view the bottom side of the Indoor Cycle. 
Remove any rust with a cloth or small brush. Wear items such as 
pedals, seat, and brake pad should be inspected for adjustment 
or replacement.  

Содержание Tsunami Elite

















Отзывы: