1 9 .
2 0 .
ST E P 2
Remove the tank stopper.
ST E P 4
Place a bucket of municipal tap water at a height that is higher than the tank
assembly, such as on a chair. Insert the syphon’s take-up tube into the bucket of
water and the syphon’s hose into the tank of the rower.
ST E P 5
Squeeze the pump 4 to 5 times until water begins flowing from the bucket into the
tank.
ST E P 3
Locate the syphon pump (M) in the tank box. Turn the valve of the pump
clockwise to close the syphon’s valve, as shown below.
M
Do NOT overfill the tank. Anything beyond Level 19 (the maximum level indicated
on the tank water level gauge) may risk leaking and void your warranty.
Note: Use either the provided blue dye OR a purification tablet. Do not use both, as they will
cancel each other out. Additional purification tablets are available upon request at:
www.waterrowerservice.com/puritabs
ST E P 6
To stop the flow of water, turn the valve of the pump counter-clockwise to open
the syphon’s valve, as shown below.
ST E P 7
Reinstall the tank stopper. It may be necessary to moisten the tank stopper to
assist with installation.
ST E P 8
Reinstall the rubber access door on the top cover.
