WaterRatGear Water Rat Boot Dryer Скачать руководство пользователя

Страница: 2 / 4

2: CONFIGURE YOUR DRYER TO THE TASK

TIPS

•

Don’t overtighten the pieces

•

Set the fan right at the top of the boot to draw fresh air in, and hold the boot top open

•

To get the dryer in position, open the boot and wiggle the dryer in the

same as you would with your foot

•

For tiny boots, try leaving the elbow piece off, just fit the nozzle onto

the straight extension pieces, as shown. Leave some room at the

bottom under the nozzle for the air to get out

•

you can turn the dryer upside down to dry your gloves or dry the inside

of a helmet

Содержание Water Rat Boot Dryer

Страница 1: ...u can dry 2 boots at once these quantities are for 1 boot dryer 1x Fan with housing guard and usb cable 1x Nozzle with curved end to stop boot damage during insertion 2x Extension pieces for longer bo...

Страница 2: ...t the dryer in position open the boot and wiggle the dryer in the same as you would with your foot For tiny boots try leaving the elbow piece off just fit the nozzle onto the straight extension pieces...

Страница 3: ...esh air in from the top of the boot and wet air is pushed out through the 4 vents To check you have air flow you can dangle a thin strip of tissue in the boot see the air movement like this feather Do...

Страница 4: ...For less wet boots damp or sweaty or a warmer room it will be quicker again The result is dry comfortable boots to wear improved health and no mould smell 5 NOISE LEVEL One dryer fan running 50dB 1m...