Waterproof TV VTV1900, Руководство пользователя

Страница: 4 / 16

27
Trouble Shooting
Check that all cables are securely fastened, that you have connected
to an aerial feed or chosen AV source and that the unit is switched on.
General Problem Suggestion & Improvement
No Signal
When first switched on this warning will display.
Only when you have tuned the TV in will the TV
work.
The TV will automatically switch off if there is no
source connected and it receives no instructions
from the operator.
eg; If watching a video, press play on the video
shortly after turning on the TV or it will switch off.
This is not a fault of the TV. For all reception
problems a qualified aerial installer should be
consulted.
Ensure that the video signal cable is correctly
connected to monitor and source.
The system supports three input signals. Check
the Monitor display is in the right input signal.
Check input sources (e.g. VCR, etc.) function
normally.
1. Ensure that the video signal cable is correctly
connected to Monitor and source.
2. Check the audio signal is connected with
“Audio in” switch correctly.
3. Check audio control is MUTE OFF.
Check if the audio signal cable is correctly
connected to the Right-audio-In and Left-audio-
In.
TV switches off
I cannot tune into
all channels
No Video Display
No Audio Output
Right-Left-Audio-
Output Error
Installation Instructions
02
STEP 1
The relative position of the TV into the mirror.
STEP 2
Lock screw.