waterpowered pink SHOWER Basic, Руководство пользователя

Страница: 10 / 12

10
them once they’ve reached the end of the
travel.
• For extended use of Pink Shower on the
same tap, it is recommended to use special
fi lters with threaded adaptors.
• Make sure the fi lter holder is screwed well
on the tap to prevent leakage once the
adaptor is mounted.
HOW TO USE PINK SHOWER
1. Screw a cannula (G) to the joint of Pink
Shower handle (F) ( fi g. 15).
2. Connect Pink Shower to tap fi lter (A1 o A2)
or Addy adaptor (J) with quick coupling (B)
by inser ng and rota ng counterclockwise
(
fi g. 16a e 16b); for a be er grip, connect
with dry hands.
3. Only in case where the distance between
the tap and the place chosen for the
douching (toilet, bathtub, etc..) is
greater than the length of the 80 cm (C)
preassembled tube, install the extension
(C2) and screw the end
fi ngs ( fi g. 17).
4. While pressing the lever of handle (F), from
the faucet control adjust water pressure
and temperature (we suggest warm water
- 37°), checking with your hand the jet of
water coming out of the cannula (Fig. 18).
5. Stop the fl ow of water in the handle, sit on
the toilet or bidet and, keeping the handle,
place Pink Shower between your legs,
gently inser ng the cannula into the vaginal
duct (
fi g. 19).
6. Pressing the lever grip, start washing the
vaginal area ( fi g. 19).
7. A er the douche, cease to press the handle
lever, gently pull the cannula and close the
water tap.
8. Unhook the quick coupling (B) from the
fi lter tap.
9. Unscrew the cannula from the handle,
could be some small leakage of water from
the upper part of Addy but this will quickly
stop. If the leakage persists or becomes
excessive, it is recommended to repeat the
process of hooking Addy to the tap.
• Don’t touch or move Addy with opened
water fl ow from the tap, in order to avoid
compromising the seal.
• When you are done with Addy, simply
unscrew one of the three screws to remove
it from the tap (
fi g.20).
• A er using Addy it is recommended to dry
it and leave the screws slightly ghtened
controlling, however, that the ps of the
screws don’t deform the gasket (
fi g.7).
• If you don’t use Addy for a long me, it
is possible that upon the fi rst re-use the
movement of the screws may be harder:
without moun
ng Addy to the tap,
try to unscrew and ghten the screws
several mes to unlock and facilitate the
movement without force. Should the
screws not unlock, use some lubricant spray
in the screw holes where you would insert
the fastening key.
• The use of Addy in case of excessive
pressure when ghtening and repeated use
on the same tap, might cause light marks
on the
fi lter holder of the tap due to contact
with the screws, being Addy intended for
use with faucets occasionally, such as while
traveling. At home or for prolonged use on
the same faucet, you should use the special
fi lters Pink Shower.
• It is not recommended to leave Addy
mounted to the tap, although if you do, for
each new use is recommended to check
that the hold is solid, making sure the 3
screws are well ghtened.
• When you unscrew the screws, do not force