10
Using Mouthwash and Other Solutions
Your Waterpik
®
Water Flosser can be used to deliver
mouthwash and antibacterial solutions. After using
any special solution, rinse unit to prevent clogging by
partially filling reservoir with warm water and running
unit with tip pointed into sink until unit is empty.
Cleaning
Before cleaning, unplug from the electrical outlet. Clean
the product when necessary by using a soft cloth and
mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning and is
top rack dishwasher safe.
NOTE:
Remove reservoir valve by pushing up from
bottom of reservoir, before placing reservoir in
dishwasher.
Removing Hard Water Deposits/
General Cleaning
Hard water deposits may build up in your unit, depending
on the mineral content of your water. If left unattended, it
can hinder performance. Cleaning internal parts: add 2
tablespoons of white vinegar to a full reservoir of warm
water. Point the handle and tip into sink. Turn unit ON and
run until reservoir is empty. Rinse by repeating with a full
reservoir of clean warm water.
This process should be done every 1 to 3 months to
ensure optimal performance.
Remove
Replace
CLEANING AND TROUBLESHOOTING YOUR WATERPIK
®
WATER FLOSSER
