Waterpik WP-120, Инструкция по эксплуатации

Страница: 8 / 12

8
Cleaning
Before cleaning, unplug from the electrical outlet.
Clean the product when necessary by using a soft
cloth and mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning
and is top rack dishwasher safe.
Note: Remove reservoir valve before placing
reservoir in dishwasher.
Removing Hard Water Deposits
Add 2 tablespoons of white vinegar to a full
reservoir of warm water. Set pressure control dial
to high, point the handle and tip into sink. Turn unit
ON (I) and run until reservoir is empty. Rinse by
repeating with a full reservoir of clean warm water.
Leakage
If leaking due to a damaged hose, contact Waterpik
International, Inc. UK Customer Service Centre at
+44 (0) 844 335 6354 for a self service repair kit.
If leakage occurs from the reservoir,
ensure the valve is right side up or
contact Waterpik International, Inc.
UK Customer Service Centre for a
replacement valve.
Service Maintenance
Waterpik
®
Water flossers have no consumer-
serviceable electrical items and do not require
routine service maintenance. for all your service
needs please call the Waterpik International, Inc.
UK Customer Service Centre at +44 (0) 844 335
6354. Some replacement parts and accessories
for the Water flosser are also available at
www.waterpik.co.uk.
for questions or problems please call the
customer service centre before returning the
product. Please do not send your unit to the
Waterpik International, Inc. address as this can
cause lengthy delays.
Refer to the serial and model numbers in all
correspondence. These numbers are located
on the bottom of your unit.
Still have questions? Go to www.waterpik.co.uk.
CLEANING AND TROUBLESHOOTING YOUR WATERPIk
®
WATER FLOSSER
Remove Replace