E
N
G
LI
S
H
9
GETTING STARTED WITH yOUR WATER FLOSSER
Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Lift the reservoir lid, remove the reservoir, and fill
with lukewarm water. Replace the reservoir over the
base and
press down firmly
and close the lid.
Inserting and Removing Tips
Insert tip into the center of the Water Flosser
handle, pressing down firmly until tip clicks into
place. The coloured ring will be flush with the
top of the handle if the tip is correctly locked into
place. Gently pull on tip to confirm it is seated
properly and locked in place.
To remove tip from the handle push the tip eject
button on the handle. The control knob will rise,
releasing the tip. Remove the tip.
Caution:
Do not press tip eject button while unit
is running.
Tip Insertion
Tip Removal
Remove
Fill
Replace
NO
Gap
Insert
Eject
Tip
Eject
Button
