![Waterous PB18 Series Скачать руководство пользователя страница 4](http://html2.mh-extra.com/html/waterous/pb18-series/pb18-series_operation-instructions-manual_3763025004.webp)
SAFETY INSTRUCTIONS
Page 3 of 20
WARNING
!
Accidental starting hazard. May cause personal injury to the hand, arm or feet.
Prevent accidental starting by removing the spark plug wire and grounding it when servicing the engine or equipment.
Disconnect negative wire from the battery terminal if equipped with electric starting system.
WARNING
!
Excessive speed notice. May cause personal injury.
Operating an engine at excessive high speeds increases the danger of personal injury. Do not tamper with the governor springs,
governor links or other parts which may cause an increase in governed engine speed. Do not tamper with the engine speed
selected by the original equipment manufacturer.
WARNING
!
Moving or rotating parts hazard. May cause personal injury.
Always keep hands and feet clear of moving or rotating parts to prevent injury.
WARNING
!
High temperature components. May cause severe burns.
Do not touch hot mufflers, cylinders or fins as contact may cause burns.
WARNING
!
Kickback notice. May cause injury to hand or arm.
To prevent hand or arm injury, pull the cord slowly until resistance is felt then pull the starter cord rapidly to avoid kickback.
CAUTION
!
Spark arrestor notice.
This engine is equipped with a spark arrestor for use on forest covered, brush covered or grass covered unimproved land, it
must be maintained in effective working order by the operator. In the state of California, the above is required by law (Section
4442 of the California Public Resources Code.) Other states may have similar laws.
WARNING
!
DO NOT strike the flywheel with a hammer or hard object as this may cause the flywheel to shatter in operation. Use correct
tools to service the engine.
WARNING
!
Equipment Tipping Hazard. May cause personal injury or equipment damage.
DO NOT run the engine if the equipment is not stable and tipping can occur. Mount equipment to a stable base. If pump is hand
carried, place the pump on a firm, level surface to operate. Maximum operating slope is 15
_
.