WL500
Manual
Page 68 Revision 4‐10‐2019
FAULT CODE TROUBLESHOOTING INDEX
1.
Display indicates “Change Filters”
2.
Display indicates “Drip Tray Full” ‐ Continuous Alarm will Sound
3.
Display indicates “Cold Fault”
4.
Display indicates “Hot Fault”
5.
Display indicates “No Water Supply”
6.
Display indicates “UV Fault” – Audible Alarm will sound for 15 Seconds
7.
Display is Intermittent
1.
Display indicates “Change Filters”
Enter Programming Mode
Menu
Options
Brief Description
Filters
Timer
3 months
Timer for Filters Life set at 3 months. Displays “Change Filters” after 3
months
6 months
Timer for Filters Life set at 6 months. Displays “Change Filters” after 6
months
9 months
Timer for Filters Life set at 9 months. Displays “Change Filters” after 9
months
None
Timer for Filters Life is turned off.
Default is None
Filters
Life
00
DAYS
Indicates amount of water flowed(gal/liters) or days elapsed since last
reset
Ensure Filters Timer is enabled and Filters Life indicates DAYS
Reset
OK?
Resets the Filters Life to zero. Confirm by selecting Button 3 (Hot) to
Save and Exit. This resets the timer.
2.
Display indicates “Drip Tray Full” ‐ Continuous Alarm Will Sound
Action
Empty and clean the drip tray. Make sure the metal clips on the tray are clean.
