WL350 Operating, Installation, and Service Manual Page 11 – Revision 8-30-2016
OPERATING INSTRUCTIONS
The above picture shows front LCD display and control panel for the Waterlogic WL350 Water
Treatment System.
For Cold Water:
Press Cold Water Select Button followed by the Dispensing Button (within 3
seconds).
For Hot Water:
Press Hot Water Select Button followed by the Dispensing Button (within 3
seconds).
NOTE:
Default selection mode is Cold Water. Selection will return to default after 3 seconds of
inactivity.
NOTE:
Selection indication light will turn Red when the Hot Water Select button is pressed, and will
switch back to the default green within 3 seconds after dispensing the hot water.
Cold Water
Select
Hot Water
Select
Dispensing Button
Temperature Indicator Light
