WaterLogic WL3 FX, Руководство пользователя

Страница: 60 / 79

WL3 FX Manual Page 60 - Revision: 7-27-2022
FAULT CODE TROUBLESHOOTING INDEX
Note About Energy Saver
: In order to qualify for Energy Star, this unit comes
with the energy saver defaulted to ON. If no buttons are pressed on the front
panel for 3 hours, the WL3 FX will enter sleep mode, and power to the heater
will be shut down. The cold water (compressor) will remain active/on 24/7.
To exit sleep mode, one of the front panel buttons (Cold Dispense, Hot Select or
Room Select) must be pushed. To disable Energy Saver Mode, see Page 59.
LED Color Remarks
Power Green
•
Always lit (while machine is on)
•
Will turn off in Sleep Mode
Filtration Green
•
Always lit
•
Will turn off in Sleep Mode
•
Will be off if Filter Timer set to “NONE”
•
Will flash continuously if Filter Timer reaches
0:00. See page 61 for filter timer reset.
UV Green
•
Stays lit under normal operation
•
If UV error, will flash continuously with audible
alarm and machine will not dispense Cold or
Ambient water.
BioCote Green
•
Always lit
•
Will turn off in Sleep Mode
LED Light Panel