ARAMARK Manual
Page 38 – Revision 10-31-21
Installing the Filter Head
A Filter Head will need to be installed in the Refresh Center. The Filter Head was supplied to you via a
separate package from Waterlogic. To install the Filter Head, you will need to remove the Lower
Front Panel that is located under the Drip Tray of the machine. For UL certification purposes, this
lower door is secured via 2 screws located on the underside of the unit. UL requires all areas of
access to wiring and high voltage components to be protected such that access requires the use of a
tool. When you install the Refresh Center in a customer location, be sure that these screws are re-
installed to ensure no one inadvertently gains access to the internals (compressor) and associated
wiring.
1.
To remove the Lower Panel, lean the unit back and remove the two Philips-head screws on
the bottom. Once the screws are removed, bring the unit back to the upright position, and
press in one of the detents in the bottom of the panel and remove.
