6
Copyright © 2021, Waterite, Inc. All Rights Reserved
1.3. Installing the Pre-Filter Cartridge
Rubber/Nitrile Gloves must be used to prevent microbial contamination.
Skip to step 1.4. if the factory has pre-loaded your filter elements.
1.
Remove the filter housing by turning counterclockwise with the housing wrench supplied (Figure 4).
2. Inspect O-ring for damage and to make sure it is seated correctly (Figure 5).
3.
Remove plastic wrap from the filter cartridge. Insert filter into housing and reassemble. –
DO NOT OVERTIGHTEN
– 1/4 turn
after hand tight is usually sufficient. See Section 8 for replacement cartridge part number.
Figure 4
Figure 6
Figure 3
