2
PRODUCT SPECIFICATION
5- Stage Reverse Osmosis Water Purification Systems
Model no: RO585
Capacity: Generates 45 to 85 gallons per day depends on water temperature, pressure, chemistry variations)
System includes
•
RO unit: 5-stage unit, all filters included.
•
Storage Tank: Pressurized tank with pre-charge pressure of 7~10 psi., powder coated steel construction with Food
Grade butyl water bladder. NSF listed
•
Water Dispensing Faucet: lead-free, long reach goose neck type, chrome steel, locking lever for continuous dispensing.
•
Hardware: feed water adapter, feed water valve, drain saddle valve, tank valve, and screws.
•
Installation & Service manual
System Requirements
•
Working pressure: 40 to 80 psi feed water pressure required, if below 40 psi, a booster pump is needed. We have a RO
system with booster pump assembly. If the input pressure is above 80 psi, you MUST put a pressure regulator to reduce
the pressure below 80 psi.
•
Working temperature: 100 ~ 40 deg. F ( 37 ~ 4 deg. C )
•
pH range: 2-11
•
If feed water has hardness level above 300 ppm, we recommend putting a water softener prior to the RO system.
•
If feed water has iron, rust problem, we recommend putting a iron filter prior to the RO system.
•
If feed water has bacteria problem, we recommend putting an ultra violet sterilizing system prior to RO system.
Filter Service Life
•
1
st
Stage Sediment filter: Recommend changing every 6 ~12 months.
Replacement filter Part no. 201
•
2
nd
Stage Carbon block filter: Recommend changing every 6 ~12 months.
Replacement filter Part no. 205
•
3
rd
Stage Carbon block filter: Recommend changing every 6 ~12 months.
Replacement filter Part no. 205
•
4
th
Stage TFC/TFM membrane: Recommend changing every 2~3 years.
Replacement filter Part no. 385
•
5
th
Stage Inline carbon filter: Recommend changing every 6 ~12 months.
Replacement filter Part no. 213
The filters & membrane used are all standard sizes.
Dimension
•
RO unit:
Length 15 inch, Width 5 ½ inch, Height 16 inch
•
Storage tank: Diameter 10 ¾ inch, Height 15 ¼ inch
•
Faucet:
9 ½ inch above counter top
Warranty
•
1 years Limited Warranty on parts, components. Filters are not under warranty.
Performance
•
Average Rejection rate: 92 to 98% of dissolved solids after RO
Purification Processes/ Filter specifications
Removes microbiological contaminants like Cysts (protozoan), inorganic/Radiological contaminants like Barium,
Cadmium, Copper, Chromium (hexvavalent), Chromim (trivalent), Fluoride, Lead, Radium 226/228, Selenium, etc.
Ammonia, Arsenic, chloramines, chlorine, copper, lead, nitrate, phosphate, silica, hardness, calcium, magnesium, other
dissolved solids.
•
1
st
stage: 5 micron sediment filter, 2 3/4”. x 9 7/8” height, made by 100% pure polypropylene fibers
•
2
nd
& 3
rd
stage: carbon filter, 2 3/4” x 9 ¾” height, composed of high-performance coconut shell carbon.
•
4
th
stage: TFC/TFM type membrane, 75 GPD, 1 ¾” x 11 ¾” long
•
5
th
stage: Inline carbon filter (polishing filter, improves taste): 2” x 10”
