| 8
8
9
10
Install back the front panel
by holding both sides.
Make sure that switches
#1 & #2 are OFF. They are
located at the rear of the
GENNY.
Connect to electricity
Connect the power cable
to the electric wall socket.
Electricity connection
EU: 230VAC/50Hz
US: 120VAC/60Hz
Hot water
thermostat
switch
Main
power
switch
Power
cable
1
3
11
12
Turn the GENNY ‘ON’ by pressing Switch #1
(the main power switch).
DO NOT
turn on #2. Make sure that the hot
thermostat switch remains OFF.
Please make sure that:
‐ The Cloud, as well as the hot and cold
buttons are all lit in white
‐ Air comes out from the bottom of the unit
‐
Wait at least 15 hours (or until the water level
is 100%) before moving onto the next step.
15+
Hours
1
2
13
14
Press the hot water button until water
starts to pour out. Then turn ON the hot
water thermostat switch (#2), making
sure that the hot water button remains a
constant red (without flashing) until the
boiling process has completed.
Dispense hot water for two minutes, then
dispense cold water for three minutes.
Your GENNY is now ready for use!
1
2
2
9 |
