| 14
Safety instructions
Read GENNY manual and maintenance instruction’s before opening the appliance. | Installation of this machine must comply with all local electrical and plumbing
codes and with all applicable federal, state, county and local standards for drinking water installations. During scheduled maintenance, carefully dispose of all used
filter parts, used UV lamps and other items following local disposal laws and regulations. | The appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children shall be supervised
not to play with the appliance. | Appliance shall be installed in accordance with the national wiring rules. | Any filling or fixing refrigerants should be done in factory
level only. | WARNING: System contains refrigerant under very high pressure. The system must be serviced by qualified person only. | This Appliance contain UV lamp.
Precautions to be taken when replacing UV-C emitters and starters, if applicable: Unintended use of the GENNY or damage to the housing may result in the escape of
dangerous UV-C radiation. UV-C radiation may, even in small doses, cause harm to the eyes and skin. | GENNY that are obviously damaged must be not be operated.
Specifications
GENNY Front Panel
Lighting Legend
When both hot and cold water
buttons are white
The water tank is empty. Please wait
for more water to be produced.
When the cold water button is blue
Cold water is ready to use.
When the blue cold water button is
blinking fast
The cold water temperature is above 10
degrees. Please call local customer service.
When the hot water button is red
Hot water is ready to use.
When the cold water button is blue
and the hot water button is white
The hot water switch is off .
When the hot water button is blinking
The water is still being heated.
When the cold water is blinking and
the hot water button is red
The child lock is active.Press both red
and blue buttons for 1 second to use
the hot water button.
When the bell symbol is orange
The front cover is open.
When the red bell symbol is blinking
Error message. Please call customer
service.
Water generation capacity
Up to 30 liters / 8 gallons gallons a day
Integrated water tank with
continuous water treatment
23 liters / 6 gallons
Cold water temp.
41°-44.6°F (5°-7°C)
Hot water temp.
185°-210°F (85°-95°C)
Dimensions (LxWxH)
54cm x 42cm x 130cm / 21.3" x 16.5" x 51.2"
Weight
80 kg / 176 pounds
Energy consumption
400 Wh/Liter for water generation in standard conditions (26.7°C, 60%RH)
Power
EU: 230 Vac / 50 Hz
US: 120 Vac / 60 Hz
Power consumption
EU: 550W Nominal / 2600W maximum, during water heating
US: 550W Nominal / 1200W maximum, during water heating
Water purification
Multi-step filtration cascade combined with high-end aqualen fibers and
microbial treatment technologies followed by a germicidal UV lamp and
UF. Vital minerals balance the water pH to achieve high purification and
tasty drinking water.
Air filtration
Sub-micron barrier filter that eliminates <2.5 particulate matter
Illuminated white circle
Indicates the water level in the
internal tank.
When the first quarter is blinking white
Indicates a critical water level in the tank.
15 |
