WaterFurnace Premier2, Руководство пользователя

Страница: 16 / 20

16
Premier2 Owner’s Manual
• The appropriate status light on the Premier2 unit will continue indicating the fault until
power is interrupted to the unit. This serves as a diagnostic aid for your dealer.
• If the unit shuts down again, call your WaterFurnace dealer as soon as possible. Do not
repeatedly reset your unit.
What if my unit does not operate properly?
Before you call your WaterFurnace dealer for service, check these service hints:
• Check air filters. Depending upon filter type, clean or replace if necessary. (See Filters,
page 14.)
• Make sure the thermostat is set properly.
• Check to make sure the electrical disconnect switches are in the
ON
position. Both the
unit and auxiliary heat (if present) must be powered for proper operation.
• Check for a tripped circuit breaker or a blown fuse in your home or building’s main
power box. Reset breaker or replace fuse.
• If either the disconnect switch or the circuit breaker continues to go off after you reset
them, call your WaterFurnace dealer immediately to prevent damage to your unit.
• Check the thermostat indicator lights to ensure proper operation of the system.
• Check the unit status lights on the corner of the unit to ensure the unit is operating
properly.
• If you can’t determine the problem, call your WaterFurnace dealer promptly.