Step 5. Connect Tubing
(Figure 7)
1. Install the Inlet Water Tubing
Connect the inlet water tubing from the feed water adapter to the inlet water port and pop the
lock clip on the fitting;
2.Install the Outlet Water Tubing
Connect the outlet water tubing from the faucet to the outlet water port and pop the lock clip on
the fitting;
Step 6. Check the Leaks and Flush the Filter
Turn on the cold water supply valve. Check if there’s water leakage at connectors, components,
valve or any connecting position. Then turn on the faucet. It may dispense muddy or black water
at the beginning. Please flush for 10 minutes continuously.
Note:
The water is not drinkable until flushing for 10 minutes.
Cartridge change instructions
Step 1. Remove the Old Cartridge
Turn off the water supply to the system. Open faucet to release the pressure and drain the water.
Unscrew the fastening ring using the filter wrench included with your system. Hold the filter head
with one hand and pull off the cartridge with another hand. Remove and discard the old filter
cartridge.
Step 2. Install the New Cartridge
Hold the filter head with one hand and insert the cartridge into the head with another hand until
two black sealing rings are fully inserted and the cartridge reaches the end.
Press the filter head downwards hard into the housing. Then screw the fastening ring counter-
clockwise with a wrench. Hang the bracket on the screws.
Step 3. Flush the System
Turn on the cold water supply valve and check if there’s water leakage. Then turn on the faucet. It
may dispense muddy or black water at the beginning. Please flush for 10 minutes continuously.
Frequently asked questions
Q: What should I do if water leaks after installation?
A: In the event of water leakage, turn off the water supply. If the water leakage is occurring at the
thread, wrap Teflon tape on the external thread. If the water leakage is occurring at the quick
connect position, check whether the cut of PE tubing is flat. If it is not flat, re-cut the tubing. Also
make sure the tubing hits the bottom of the fitting. Contact us for solutions if the water leakage
persists.
Close
Inlet Hose
Cold
Hot
Outlet Hose
Filter system
Faucet hose
Figure 7
Inlet
Outlet
