Waterco Chemflo Plus, Руководство пользователя

Страница: 3 / 20

Page 1
What’s in the box?
•
Mounting brackets; top and bottom
•
Multi-electrode (probe)
•
Power Supply and Mains Cable
•
Tubing
•
Dual peristaltic pump module
•
User Manual
•
Injection manifold
•
Mounting hardware (raw plugs, screws and paper template)
IMPORTANT SAFETY MEASURES:
•
Always add concentrated chemicals to water
– not the other way around!
•
Don’t allow chemicals to mix – dangerous, highly corrosive fumes produced.
•
Always wear protective clothing, footwear, gloves and eye protection when
handling pool chemicals to avoid injury.
•
If a spill occurs, wash the affected area with fresh water immediately and seek
medical attention.
•
Work in a well-ventilated area and avoid inhalation of fumes.
•
Read and follow safety instructions on chemical drums.
Operation Following a Power Failure
The unit comes with a timer function built into the operating software. The
timer is a 24-hour type with quartz-crystal control. This Timer is backed-up by a Real-Time
Clock (RTC) similar to those found in computers.
During a power failure the will keep time and maintain AutoMode functions.
If a Filter Cycle is active when power is returned the pump will be turned ON within 1
minute. The will keep all its settings and will not need to be re-programmed.
The is ideal for use in systems where repeated power cuts occur, such as off-
peak power circ
uits and Queensland’s Tarriff33 system.