I pg 05
Waterco Hydrochlor®
EZY TIMER SETTING
Setting a New Time
I. Press
HOME
key to ensure current time is displayed.
II. Press
HOURS
key, to change hours.
III. Press
MIN
key, to change the minutes.
IV. Current time is now set.
Setting the Timer
Setting Timer 1.
I. Press
TIMER
key to change Timer 1 Start hours.
II. Press
HOURS
key, to change hours.
III. Press
MIN
key, to change the minutes.
IV. Press
TIMER
key again to toggle Timer 1 Finish.
V. Press
HOURS
key, to change hours.
VI. Press
MIN
key, to change the minutes.
Timer Default Settings
A new Hydrochlor® initially has been set with the following defaults timers:
SUMMER
Timer 1 START
8:00
Timer 1 FINISH
12:00
Timer 2 START
16:00
Timer 2 FINISH
20:00
WINTER
Timer 1 START
9:00
Timer 1 FINISH
11:00
Timer 2 START
17:00
Timer 2 FINISH
19:00
All time settings can be individually programmed; however altering the [SUMMER] times will
automatically change the matching WINTER time to:
START Times
[SUMMER] Time + 1 hr
END Times
[SUMMER] Time - 1 hr
(Unless the START time is 23:xx hours or the FINISH time is 0:xx hours, in which case the WINTER
time will be set to the same as the [summer] time).
Therefore unless a particular set of WINTER times are required, there is no need to separately enter
them.
