Water HousePure HP-Soft-2, Руководство по установке

Страница: 5 / 18

Setup
Unpacking and Inspection
Check the system components for damage or missing parts.
Where to Install the Softener
Consider the following points when determining where to install the water softener:

Place the system as close as possible to a sewer drain.

Do not install the softener where it would block access to the water heater, or access to the main water shutoff,
water meter, or electrical panels.

Keep outside faucets on hard water to save soft water and salt.

Install the softener in a place where water damage is least likely to occur if a leak develops.

A 120V electrical outlet is needed to plug in the transformer. If the outlet is remote (up to 100 feet), use 18 gauge
wire to connect.

Always connect the system to the main water supply pipe before the water heater.

Install the system where it will not be subject to temperatures outside of the limits stated in the Specification
section or to direct sunlight.
Hardness Setting
Municipal Water:
Water, Inc.
recommends that you call your local water company to determine your water hardness in grains per
gallon and iron in mg/l (or ppm).
Well Water:
Water, Inc.
recommends that you have your water tested professionally for accurate hardness and iron content.