15
Specifications
The REIONATOR
®
is a DIR (demand initiated regeneration) softener which complies with specific
performance specifications intended to minimize the use of regenerant brine in its operation.
This water softener conforms to NSF/ANSI Standard 42 for reduction of aesthetic chlorine and NSF/
ANSI Standard 44 for softening efficiency as verified and substantiated by test data. While testing was
performed under laboratory conditions, due to varying water conditions actual performance may vary.
The REIONATOR
®
has been tested according to NSF/ANSI Standard 42 for the reduction of the
substances listed in the table below. The concentration of the substance in the water entering the
system was reduced to a concentration less than or equal to the permissible limit for water leaving the
system as specified by NSF/ANSI Standard 42.
The REIONATOR
®
is not intended for use in treating water that is microbiologically unsafe or of unknown
quality without adequate disinfection before and/or after the system.
Usage of the REIONATOR
®
in a manner other than prescribed in the manufacturer’s warranty will void
the REIONATOR
®
limited lifetime warranty.
As with any appliance, proper operation and maintenance is required to ensure trouble-free operation.
Please consult your local authorized WaterTech dealer for service.
MODEL*
AESTHETIC CHLORINE
REDUCTION (GALLONS)
RC32-TM
810
RC40-TM
1000
RC48-TM
1180
RC64-TM
1580
RC80-TM
1954
*RC/RP/RF Models perform identically
