!
!
IMPORTANT TIPS
NOTE:
When not in use, your cleaner should be stored
indoors
, in a
clean dry location sheltered from direct sunlight, extreme temperatures,
and rain. Do not store the cleaner in a garage or anywhere the unit
could freeze.
You may clean the cleaner body with soap and water. Avoid using
solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be
damaged by their use. Use a clean cloth to remove dirt, dust, oil,
grease, etc.
General maintenance of your cleaner requires you to occasionally clean
off the O-rings on the head and add non-curing, non-toxic, high-temp,
silicon lubricant/sealant, such as Dow Corning 111. This will ensure
easier turning and a watertight seal. You can order lubricant directly from
Water Tech (Part No. PBLUBE) or at your local pool & spa retailer.
CAUTION
Do not at any time let brake fluids, gasoline, petroleum-based products,
penetrating oils, etc. come into contact with plastic parts. They contain
chemicals that can damage, weaken or destroy plastic.
WARNING
Do not attempt to modify this tool or create accessories not approved for
use with this tool. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible serious injury.
The motor is factory sealed in the motor box and CANNOT BE
REPLACED. Do not attempt in any way to destroy or disassemble motor
box or any of its components. Instead, take your cleaner to an
authorized service center. Failure to follow these instructions may void
your warranty agreement.
SERVICE INFORMATION
NOTE:
Any repairs requiring disassembly must be performed by a
Water Tech Authorized Service Center. For the repair center nearest
you, go to www.poolblaster.com or call us toll free at 1-800-298-8800.
Unauthorized repairs will void the warranty.
For maximum cleaning efficiency, the filter bag/seal ring should be
checked, emptied and cleaned after each use or whenever you notice the
performance of your cleaner declining.
To clean the filter bag
Make sure the unit is off before changing the filter or performing any other
routine maintenance.
Remove the filter bag/seal by pulling firmly on the head cover
Invert the filter bag and rinse it with a garden hose or in a sink. Note: DO
NOT clean in a washing machine or with detergent.
Re-insert the filter bag when finished and reattach head cover.
Note: Your reusable filter bag should be replaced if the seal ring is worn
or if the bag is torn
WARNING:
When servicing user serviceable parts, use only identical
W
a
ter Tech replacement parts. Use of any other parts may create a
hazard or cause product damage.
WARNING: Using your
cleaner without the filter
bag/seal in place will cause
blockages in your machine
and void your warranty.
!
!
a
CLEANING THE REUSABLE FILTER BAG
10
3
