Water Maze HBG-15 Скачать руководство пользователя страница 5

HBG EVAPORATOR

 

 

OPERATOR’S MANUAL

  

5

HBG • 8.913-990.0-K

 9.   When the machine is work ing, do not cover or place 

in a closed space where ventilation is in suf fi  cient. 
Avoid in stall ing ma chines in small con fi ned  ar eas. 
Ad e quate ox y gen is need ed for the evap o ra tion pro-
 cess. Standard minimum clearances for this type of 
appliance is 18" from fl oor, sides and rear and 48" 
from electrical control box. The minimum clearance 
from the vent stack is 18".  This appliance must be 
installed on non-combustible fl oors.

10.  The HBG and components will freeze if not in 

op er a tion. In cold cli mates locate HBG in heated 
en clo sure.

11.  Run ning the system with out water damages the tank 

fl oor and voids the war ran ty.

 

 NOTE:

 Allow tank to cool before adding wastewater 

or dam age will occur to  tank fl oor due to  ther mal 
shock.

12.   The HBG must be installed and train ing provided by 

an au tho rized deal er.

13   Do not operate the equip ment in an unvented, en-

 closed area. Car bon mon ox ide may ac cu mu late.

14.   If you smell gas, shut off the gas 

sup ply valve, ex tin guish any 
open fl ame and test all joints 
with a soap so lu tion. If the odor 
per sists, call your gas sup pli er 
im me di ate ly.

15.   Only those liquid wastes 

that have been approved by 

WATER MAZE

, and the prop er 

regulatory agencies, should be 
placed in the HBG ma chine. Test

     methods as outlined in 

WA TER MAZE

 Pro fi le 3518 

must be ob tained. 

NOTE:  

WA TER MAZE

 is not li a ble 

for the per for mance and the warranty will be void 
when waste liq uids that are not test ed and ap proved 
are in tro duced into the HBG.

  16.  Chemistry limitations include:

   Maximum 1,000 mg/L chlo rides for 316L stain less 

steel.

   Maximum  40,000  mg/L  chlo rides for AL-6XN 

stainless steel pH be tween 7.0 and 9.0.

   Initial  oil  concentration  be tween 500 and 5,000

mg/L or a corrosion in hib i tor for car bon steel.

Deviations from these parameters must be ap proved 
by Engineering.

ELECTRICAL SAFETY

Ground equipment before con nect ing to the elec tri cal 
pow er sup ply.

Fail ure to ground the equip ment can 
cause a se vere or fa tal elec tri cal 
shock haz ard.

Do not ground to a gas sup ply line.

To avoid dangerous or fatal elec tri cal 
shock, dis con nect the pow er to the 
equip ment be fore work ing on any elec-
 tri cal con nec tion or making any re pairs.

Supply voltage must be within ± 10% 

of the name plate volt age. In cor rect volt age can cause 
a fi re or seriously dam age the equip ment and void the 
war ran ty. If in doubt, con sult a li censed elec tri cian.

Con nect the equipment to a ded i cat ed circuit break er.

DA N G E R : T h i s   m a c h i n e   i s 
equipped with an elec tron ic ig-
 ni tion sys tem. Light ing of the 
pi lot is ac com plished through 
elec tron ic spark ignition. Do not 
at tempt to light the ap pli ance 
man u al ly as a  burn in ju ry or elec-
 tri cal shock may result.

WARNING

RISK OF EX PLO SION: 

DO NOT USE WITH 

FLAMMABLE 

LIQUIDS.

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING

If you do not follow these instructions exactly, a fi re or explosion 
may result, causing property damage, personal injury or loss of 
life.

A. This appliance has a pilot which must be electrically ignited.
    When lighting the pilot, follow these instructions exactly.

B. Before lighting, smell all around the appliance area for gas. Be
    sure to smell next to the fl oor because some gas is heavier than
    air and will settle on the fl oor.

FOR YOUR  SAFETY

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.
Do not touch any electrical switch. Do not use any phone in the 
building.
Immediately call your gas supplier from a neighbor’s phone. Follow
the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fi re department.

C. Use only your hand to push in or turn the gas control knob. 
Never use tools. If the knob will not push in or turn by hand, don’t 
try to repair it. 
Call a qualifi ed service technician. Attempted repair or use of 
force may result in a fi re or explosion.

D. Do not use this appliance if any part has been under water. 
    Immediately call a qualifi ed service technician to inspect the
    appliance and to replace any part of the control system and
    any gas control which has been under water.

HAZ ARD OUS  VOLTAGE 

CAN SHOCK, BURN 

OR CAUSE  DEATH. 

GROUND SYS TEM 

BE FORE CON NECT ING 

TO POW ER SUPPLY.

DANGER

HAS  ELEC TRON IC 

SPARK  IG NI TION. 

DO NOT AT TEMPT  

TO LIGHT MAN U AL LY.

DANGER

Содержание HBG-15



















































Отзывы: