![Water Maze HBG-15 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/water-maze/hbg-15/hbg-15_operators-manual_3562908014.webp)
14
HBG EVAPORATOR
OPERATOR’S MANUAL
HBG • 8.913-990.0-K
Batch Cycle Counter Quick
Reprogramming Instructions
Function Settings
Reset Button.
Push to restart machine after batch cycle com plet ed.
Scroll Button.
Push to select the different programming modes. Also
saves program values.
Vertical Scroll
changes programming values.
Horizontal Scroll
for multiple values. Also changes pro gram ming values.
▲
1. Pull face plate of batch cycle counter out of its holder in electrical box with your fi ngers . Dip switch #7,
located along left side (wall) of circuit board, needs to be switched to the down (OFF) position. This will
allow for reprogramming. Slide batch counter back into its holder.
2. Press button until LED screen in green shows ( #
02
). Push the
▲
or button until the new
batch cycle count appears in green. Then press the button once to save the setting for preset 1.
3. Press button once more. The LED screen in green will show ( #
02
). Push the
▲
or until the
value in green is the same value in preset 1. Press button to save setting for preset 2.
4. Remove batch cycle counter once again from its holder in the elec tri cal box. Change the setting on dip
switch #7 to the up (ON) po si tion. Slide the batch counter back into its holder in the elec tri cal box.
NOTE:
# stands for batch count val ue
Elec tri cal Box
Holder
Pry Slot
Face Plate
Dip
Switch es
Содержание HBG-15
Страница 50: ...HBG 8 913 990 0 Printed in U S A...