11
Feed Water Valve Installation (Fig. 3)
(
Important:
See note on state requirements below.)
Drain Connection Installation (Fig. 4)
For 3/8” OD tubing use side
of bracket with projections.
Nut/Seal
Piercing
Lance
For 7/16” - 1/2” OD tubing or
rigid pipe use “V” side of bracket.
Insert
Plastic Sleeve
Compression Nut
1/4” Orange Feed
Water Tubing
NEVER MOUNT HERE
Drain Connection
(horizontal example)
Drain Saddle Elbow
Drain Saddle
Mount drain saddle
at either location.
Hole should be located
on top of the pipe.
NOTE:
Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain connections. The
use of saddle-type valves are prohibited in: Alaskas, Delaware, Idaho, Kentucky, Massachussets, Michigan, Minnesota,
New Hampshire, North Dakota, Oregon, and South Dakota. Chack your local plumbing codes for any restrictions that apply.
Massachusetts CMR 248 strictly prohibits the use of saddle type valves. The feed water connection must conform to applicable
plumbing codes.