5
General Operation
When the system is operating one of two
displays will be shown. Pressing NEXT will
alternate between the displays. One of the
displays is always the current time of day.
The second display is one of the following:
days remaining or gallons remaining. Days
remaining is the number of days left before
the system goes through a regeneration cy-
cle. Capacity remaining is the number of gal-
lons that will be treated before the system
goes through a regeneration cycle. The user
can scroll between the displays as desired.
If the system has called for a regeneration
that will occur at the preset time of regenera-
tion, the words “REGEN TODAY” will appear
on the display.
When water is being treated (i.e. water is flowing through the system) the word “Softening” or “Filtering”
flashes on the display if a water meter is installed.
Manual Regenera
Ɵ
on
To initiate a manual regeneration at the preset delayed regeneration time, press and release “REGEN”. The
words “REGEN TODAY” will flash on the display to indicate that the system will regenerate at the preset
delayed regeneration time. If you pressed the “REGEN” button in error, pressing the button again will cancel
the request.
To initiate a manual regeneration immediately, press and hold the “REGEN” button for three seconds. The
system will begin to regenerate immediately. The request cannot be cancelled.
Speci
fi
ca
Ɵ
ons
Minimum/Maximum Operating Pressures
20 psi (138 kPa or 1.4 bar) -
125 psi (862 kPa or 8.6 bar)
Minimum/Maximum Operating Temperatures
40°F (4°C) - 110°F (43°C)
Power Adapter:
Supply Voltage
Supply Frequency
Output Voltage
Output Current
120 V AC
60 Hz
12 V AC
500 mA
No user serviceable parts are on the PC board, the motor, or the power adapter. The means of
disconnection from the main power supply is by unplugging the power adapter from the wall.