Warranty / Maintenance information
All BrassMaster water softeners feature
the Assured Performance Modular
(APM) design. If you experience a
failure of any valve component, the
brass module can be easily removed and
replaced with a factory remanufactured
replacement module.
To remove module, index the bypass
valve to its “Bypass” position. Cycle
control knob 360 degrees through
complete cycle to relieve water pressure.
Remove the stainless-steel retainer pins
at the base of the module, loosen the
clips at the bypass valve, and disconnect
the drain line and brine line. The module
will now completely separate from the
tank. Please contact your dealer or the
factory for module support.
Limited Warranty
Please see enclosed
Official Warranty
for complete warranty details.
Manufactured by:
Water Control Corporation
7150 143rd Ave NW
Ramsey, MN 55303
Tel: 763-427-9635
Fax: 763-427-5665
