•
Design and specifications are subject to change without notice.
•
Watec is not responsible for any inconvenience or the attendant damages
to the video and monitoring recording equipment caused by misuse, mis-
operation or improper wiring of our equipment.
•
If for any reason the WAT-902H
2/3
SUPREME does not work properly, or
if you have any questions regarding installation or operation, please
contact the distributor or dealer from which it was purchased.
1050Z00-Y2000008
9) Set the AGC mode by
⑩
AGC SELECTION SWITCH.
(AGC mode is set to HI upon shipment.)
Mode
Range
Effect
HI
5
～
50dB
・
When minimum illumination is more
important than the S/N ratio
(Surveillance in a low light
environment)
LO
5
～
32dB
・
When SN ratio is more important than
minimum illumination.
・
When adequate lighting is present or
a stable lighting condition is
available.
Options
To purchase these options, please contact the distributor or dealer from
which you purchased the WAT-902H
2/3
SUPREME.
Specifications
WAT-902H
2
SUPREME
WAT-902H
3
SUPREME
WAT-902H
2
SUPREME / WAT-902H
3
SUPREME
WAT-902H
2/3
SUPREME
Model
EIA
CCIR
Number of
Total Pixels
811(H)
×
508(V)
795(H)
×
596(V)
Number of
Effective Pixels
768(H)
×
494(V)
752(H)
×
582(V)
Sync. System
Internal
Scanning System
2:1 interlace
Video Output
Composite video, 1.0 V(p-p) 75
Ω
(Unbalanced)
Resolution (H)
More than 570TVL (Center)
S/N
More than 46dB (AGC=5dB,
γ=
1.0)
OFF
1/60 sec.
1/50 sec.
FL
1/100 sec.
1/120 sec.
AE
Mode
EI
1/60-1/100000 sec.
1/50-1/100000 sec.
AGC
HI: 5-50dB / LO: 5-32dB
Gamma
Characteristics
γ≒
0.45
Lens iris
Video / DC (EIAJ arrangement, Auto-select)
Back Light
Compensation
ON
Power Supply
DC+12V
±
10%
Operating
Temperature
-10
-
+40
℃
(Without condensation)
Operating Humidity
Less than 95% RH
Storage
Temperature
-30
-
+70
℃
(Without condensation)
Storage Humidity
Less than 95% RH
Lens Mount
CS-mount
Size
35.5(W)
×
36(H)
×
63(L) (mm)
Weight
Approx. 90g
Contact information
Watec Co., Ltd.
Watec Co., Ltd.
Watec Co., Ltd.
Watec Co., Ltd.
Add.:
254-2 Nihonkoku, Daihoji, Tsuruoka- Shi,
Yamagata-Ken, 997-0017 Japan
TEL: +81-235-23-4400 FAX: +81-235-23-4409
E-mail
:
URL: http://www.watec.net
WAT-902H
2
SUPREME
Model
EIA
CCIR
Pick-up Element
1/2 inch interline transfer CCD image sensor
Unit Cell Size
8.4
μ
m(H)
×
9.8
μ
m(V)
8.6
μ
m(H)
×
8.3
μ
m(V)
Minimum Illumination
0.0003 lx. F1.4
Power Consumption
1.98W (165mA)
WAT-902H
3
SUPREME
Model
EIA
CCIR
Pick-up Element
1/3 inch interline transfer CCD image sensor
Unit Cell Size
6.35
μ
m(H)
×
7.4
μ
m(V) 6.5
μ
m(H)
×
6.25
μ
m(V)
Minimum Illumination
0.0005 lx. F1.4
Power Consumption
1.86W (155mA)
C-mount Adaptor (30CMA-R)
This lens mount adaptor is
used to convert a CS-mount to
a C-mount.
Mini Stand (MS50)
A convenient stand for the
WAT-902H
2/3
SUPREME. With
this stand, the camera can be
adjusted to any desired angle.
