Watec WAT-1200CS Скачать руководство пользователя страница 31

Страница: 31 / 50

○

Day

⇔

Night switching threshold adjustment procedure

The procedures for adjusting DAY

→

NIGHT and NIGHT

→

DAY is as follows.

(1) Set DAY

→

NIGHT = 255 (Max. value)

NIGHT

→

DAY = 0 (Min. value), DELAY CTL = 001.

(2) Adjust the lighting and reproduce the brightness you want to

switch to the Night mode while checking the monitor.

(3) Lower the set value of DAY

→

NIGHT one by one until it switches

from the Day mode to the Night mode.

(4) Jump to (6) if the hunting that the Day mode and the Night mode

switch countinuously does not occur.

If the hunting occurs, go to (5).

(5) It may be impossible to respond by switching using the threshold of

Day/Night mode.Please change the object and lighting.

(6) Adjust the lighting and reproduce the brightness you want to switch

to Day mode while checking the monitor.

(7) Higher the set value of NIGHT

→

DAY one by one until it switches

from the Night mode to the Day mode.

(8) If the hunting does not occur, go to (11).

If the hunting occurs, go to (9).

(9) Lower the set value of NIGHT

→

DAY until the hunting stops.

(10)If you are not satisfied with the adjustment result

of NIGHT

→

DAY, back to (5).

(11) Make change of lighting and confirm the switching

of Day / Night is done without problems

(12)If there is no problem with the above setting, the adjustment is

completed. Please save the setting.

*Illuminance is used for judgment of brightness.

Therefore, we recommend to readjust the Day / Night switching

threshold when changing the aperture of the lens.

(1)Default

(2)DAY

→

NIGHT

(3)DAY

→

NIGHT setting

(5)Review of imaging

environment

(4)Hunting

Adjustment environment

settings

(6)NIGHT

→

DAY

(7)NIGHT

→

DAY setting

(8)Hunting

(9)NIGHT

→

DAY resetting

Adjustment environment

settings

(10)Adjustment result

(11)Operation check

(12)Adjusted

Содержание WAT-1200CS



















































Результаты поиска

Содержание WAT-1200CS

Отзывы:

Похожие инструкции для WAT-1200CS

Бренды по названию

Популярные бренды

Watec WAT-1200CS, Руководство пользователя OSD

Результаты поиска

Содержание WAT-1200CS

Отзывы:

Похожие инструкции для WAT-1200CS

Бренды по названию

Популярные бренды