3.5.1 Auto Trace White Balance(ATW)
ATW maintains color reproducibility even when the color temperature of the light source changes.
When ATW is selected, press the ENTER to display the WHITE BAL menu. Move the cursor up or down with the UP / DOWN and
use the LEFT / RIGHT to adjust items.
3.5.2 Push White Balance(PUSH)
PUSH controls the white balance over a wider color temperature range than ATW and maintains color reproducibility regardless of subject conditions.
*Speed control setting is not available.
ENTER
DELAY CTL
Set the time from the changes in color temperature to the start of white balance control.
*Default : 128
Set the pull-in speed. The lead-in speed can be set in the range 1-255.
LEFT/RIGHT
ATW
Light source color temperature = 2800K
SPEED
*Default : 008
WB
Light source color temperature = 4700K
The lower the set value, the faster the pull-in speed, and the larger the set value, the slower the pull-in speed.
OPERATION
(ATW SETUP Menu)
Light source color temperature = 6600K
Selectable in the range 1-255. The lower the set value, the faster to start WB control, the higher the set
*Note : Color oscillation is likely to occur if the pull-in speed is set too fast.
value, the slower to start WB control.
17
