PART V: Administering a Security Policy
6
WatchGuard Firebox Vclass
Data interfaces
Four accelerated, Ethernet interfaces (RJ-45 connectors) labeled 0
(
Private)
, 1 (
Public)
, 2 (
DMZ1
), and 3 (
DMZ2)
act as the primary
conduits through which passes all of the network data traffic.
Incorporated into each interface are two indicator lights labeled
10
and
100
. These LEDs indicate the speed of traffic being
transmitted.
HA status LED
Indicates the current status of this appliance, if it is one of two
connected as a high-availability system. If this is the primary
appliance, and the light is on and steady, the system is functional,
and this appliance is on-line. If this is the primary appliance and
the LED is blinking, a failover has occurred and the secondary
appliance is online.
Console interface
A single RJ-45 interface, labeled
Console
, permits a direct
workstation-to-appliance connection. You can use the
WatchGuard Command Line Interface (CLI) to configure and
administer this appliance. For more information about this
administrative option, see the
CLI Guide
.
Reset port
This opening allows you to insert a straight pin or paperclip and
press an internal reset switch that restarts the appliance.
The back panel of a Firebox V60 or V80 contains the features shown in the
following illustration.
VclassHardwareGuide.book Page 6 Monday, December 16, 2002 11:25 AM
