PART V: Administering a Security Policy
4
WatchGuard Firebox Vclass
Data interfaces
Two Ethernet interfaces (RJ-45 connectors) labeled
0
and
1
, act as
the primary data interfaces. Incorporated into each Ethernet
interface are two indicator lights labeled
10
and
100
. These LEDs
indicate the speed of traffic being transmitted.
Console interface
A single RJ-45 interface, labeled
Console
, permits a direct
workstation-to-appliance connection. You can use the
WatchGuard Command Line Interface (CLI) to configure and
administer this appliance. For more information about this
administrative option, see the
CLI Guide
.
5Vdc3.0A power interface
This interface serves as the connection to a 100VAC-to-240VAC
(50/60Hz) source. Use the power cord supplied in the package to
connect this appliance to a UPS device or to a power outlet. The
power supply can auto-detect 110/220 voltage.
Appliance reset
This opening allows you to insert a straight pin or paperclip and
press an internal Reset switch that restarts the appliance. This is
an option to unplugging and replugging the power cord.
VclassHardwareGuide.book Page 4 Monday, December 16, 2002 11:25 AM
