To power the AP with the optional 12V DC power adapter and connect the AP to your network:
n
Plug the optional 12V power adapter into the DC IN power port on the bottom panel of the AP225W,
then plug the power adapter into an AC power source.
n
To connect the AP225W to the network, connect an Ethernet cable into the POE In LAN/Uplink port
on the rear panel of the AP. Make sure the other end of the Ethernet cable is connected to your network
through a hub or switch.
n
Connect an optional Ethernet cable from your network into the PASS-THROUGH port on the rear
panel of the AP225W.
WatchGuard AP225W Hardware Guide
10
WatchGuard Technologies, Inc.