9
Watcher Total Protection
XL Series User Manual
Group Setup and Recording Schedule
This section outlines how to setup groups of cameras to record on a certain schedule. For example, if
you wanted all the cameras that show the registers to only record when there is motion and the parking
lot cameras to record all the time then you would set that here.
1.)
Start on the Main DVR screen.
2.)
Click on Setup button (
).
3.)
Click on Camera Setup button.
Selected Group
– Select the Group number for the cameras.
Record Sub Stream
– Enables or Disables sub stream recording. This is used to lower the video quality to
allow for playback on either lower end computer systems or mobile devices.
Select Camera
– Select the cameras for this group. Note: if the camera number is silver it means it is not
selected. If the camera number is blue then it is selected as a part of the group.
Pre-Event Record
– Select the start time of the recording when the camera is triggered.
Post Record Time
– Select the end time of the recording when the camera is triggered.
Record Audio
– Selects whether or not the program records audio or not, this settings in not available
for IP Cameras, for stream type of IP Camera, you should set it remotely in IP Camera setup.