WatchDog WatchDog 3349SS, Руководство по эксплуатации продукта

Страница: 15 / 36

15
The first step you must take is tell the PDA or PC where
to find the Sprayer Station. This is done by identifying
the communications (or “serial”) port the Station is
plugged into. For most PDAs, the serial port will be
“COM1”. For PDAs such as the iPaq, which do not have
a built-in serial port, a card can be added to provide a se-
rial port. Documentation provided with these cards will
identify their port number.
If you are uncertain of the COM port on your PC, follow
the steps below.
1. If you are using a USB to Serial converter, plug it into
your PC.
2. From the Start menu, or on the Desktop, right-click
“My Computer”.
3. Select “Properties”.
4. Select the “Hardware” tab.
5. Select
“Device Manager”.
6. Click on the “+” to the left of “Ports (COM & LPT)”.
A built-in serial port will be labeled “Communications
Port”. A USB converter will generally have “USB to Se-
rial” in its name. In either case, the communications port
will be in parentheses, as in “(COM1)”.
Once you have identified the communications port you are
using, you must configure the station parameters in
SpecWare Mobile. Using your stylus, tap “Menu” in the
lower left corner. On a PC, click “Menu” in the upper left
corner. Your menu options are displayed on the next
page.